Aiyangar, A.; Gale, T.; Magherhi, S.; Anderst, W. How many trials are needed to estimate typical lumbar movement patterns during dynamic X-Ray imaging? J. Biomech. Eng. 2023, 145 (7), 074503 (8 pp.). https://doi.org/10.1115/1.4062117

Brunner, A. J. A review of approaches for mitigating effects from variable operational environments on piezoelectric transducers for long-term structural health Monitoring. Sensors 2023, 23 (18), 7979 (19 pp.). https://doi.org/10.3390/s23187979

Brunner, A. J.; Blackman, B. Current issues in fracture and fatigue fracture of fiber-reinforced polymer composites: an overwiew. In Proceedings of the 2023 international conference on composite materials, presented at the Proceedings of the 2023 international conference on composite materials, Belfast, July 30-August 4, 2023; Falzon, B., Mc Carthy, C., Eds.; Queen's University Belfast: Belfast, 2023; p (12 pp.).

Brunner, A. J.; Trattnig, H. Herausforderungen für Langzeitüberwachung von Strukturen und Komponenten mit Schallemission. In SCHALL 23 - Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen, presented at the SCHALL 23, Wetzlar, Germany, March 21-22, 2023; DGZfP-Berichtsband; Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP): Berlin, 2023; Vol. BB 179, p (8 pp.).

Brunner, A. J.; Alderliesten, R.; Pascoe, J. A. In-service delaminations in FRP structures under operational loading conditions: Are current fracture testing and analysis on coupons sufficient for capturing the essential effects for reliable predictions? Materials 2023, 16 (1), 248 (24 pp.). https://doi.org/10.3390/ma16010248

Cadosch, H.; Morrisset, D.; Law, A.; Terrasi, G.; Bisby, L. The influence of feedback and convection on imposed heating conditions when using gas-fired radiant panels in fire testing. Fire Saf. J. 2023, 141, 104013 (10 pp.). https://doi.org/10.1016/j.firesaf.2023.104013

Dai, Y.; Li, Z.; Wang, B. Optimizing berth allocation in maritime transportation with quay crane setup times using reinforcement learning. J. Mar. Sci. Eng. 2023, 11 (5), 1025 (14 pp.). https://doi.org/10.3390/jmse11051025

Dong, S.; Wu, X.; Qi, X.; Affolter, C.; Terrasi, G. P.; Xian, G. Prediction model of long-term tensile strength of glass fiber reinforced polymer bars exposed to alkaline solution based on Bayesian optimized artificial neural network. Constr. Build. Mater. 2023, 400, 132885 (12 pp.). https://doi.org/10.1016/j.conbuildmat.2023.132885

Dreyer, M. J.; Kneifel, P.; Hosseini Nasab, S. H.; Weisse, B.; Taylor, W. R. A novel method to accurately recreate in vivo loads and kinematics in computational models of the knee. Comput. Methods Biomech. Biomed. Eng. 2023. https://doi.org/10.1080/10255842.2023.2206934

Febrer-Nafría, M.; Dreyer, M. J.; Maas, A.; Taylor, W. R.; Smith, C. R.; Hosseini Nasab, S. H. Knee kinematics are primarily determined by implant alignment but knee kinetics are mainly influenced by muscle coordination strategy. J. Biomech. 2023, 161, 111851 (8 pp.). https://doi.org/10.1016/j.jbiomech.2023.111851

Gfrerrer, M.; Wiener, J.; Brunner, A. J.; Pinter, G. Schallemissionsanalyse während der zyklischen Belastung von kontinuierlich faserverstärkten Kunststoffen. In SCHALL 23 – Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen, presented at the SCHALL 23, Wetzlar, Germany, March 21-22, 2023; DGZfP-Berichtsband; Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP): Berlin, 2023; Vol. BB 179, p (9 pp.).

Haiden, L.; Brunner, A. J.; Pansare, A. V.; Feuchter, M.; Pinter, G. Tailoring the optical and UV reflectivity of CFRP-epoxy composites: approaches and selected results. Sci. Eng. Compos. Mater. 2023, 30 (1), 20220175 (12 pp.). https://doi.org/10.1515/secm-2022-0175

Kadu, R. K.; Thakur, P. B.; Zote, S. W.; Donde, K. J.; Barbezat, M.; Terrasi, G. P.; Patil, V. R.; Pansare, A. V. Blue light-emitting fluorene-dendron hybridized polymers: optophysical features. Polym. Bull. 2023, 80 (9), 10379-10392. https://doi.org/10.1007/s00289-022-04571-x

Li, Z.; Jiang, X.; Hopman, H.; Affolter, C. Surface crack growth in metallic pipes reinforced with fibre-reinforced polymers subjected to cyclic loads: an analytical approach. Theor. Appl. Fract. Mech. 2023, 127, 104070 (12 pp.). https://doi.org/10.1016/j.tafmec.2023.104070

Michel, S.; Hauf, F.; Brunner, A. J. Evaluation of a climbing drum laminate peel test to determine the interlaminar mode I fracture toughness of thin CFRP laminates - comparison with the standard mode I DCB test and a mandrel laminate peel test proposed by ESIS TC4. Front. Mater. 2023, 10, 981647 (13. https://doi.org/10.3389/fmats.2023.981647

Mohammed, H.; Sultangaliyeva, F.; Wyrzykowski, M.; Terrasi, G. P.; Bisby, L. Heat-induced explosive spalling of self-prestressing, self-compacting concrete slabs. Constr. Build. Mater. 2023, 372, 130821 (11 pp.). https://doi.org/10.1016/j.conbuildmat.2023.130821

Mohsin, M. A. A.; Iannucci, L.; Greenhalgh, E. S. Delamination of novel carbon fibre-based non-crimp fabric-reinforced thermoplastic composites in Mode I: experimental and fractographic analysis. Polymers 2023, 15 (7), 1611 (14 pp.). https://doi.org/10.3390/polym15071611

Palacio, O.; Malfait, W. J.; Michel, S.; Barbezat, M.; Mazrouei-Sebdani, Z. Vibration and structure-borne sound isolation properties of silica aerogels. Constr. Build. Mater. 2023, 399, 132568 (13 pp.). https://doi.org/10.1016/j.conbuildmat.2023.132568

Rüthi, J.; Rast, B. M.; Qi, W.; Perez-Mon, C.; Pardi-Comensoli, L.; Brunner, I.; Frey, B. The plastisphere microbiome in alpine soils alters the microbial genetic potential for plastic degradation and biogeochemical cycling. J. Hazard. Mater. 2023, 441, 129941 (14 pp.). https://doi.org/10.1016/j.jhazmat.2022.129941

Sharma, K.; Morlec, E.; Valet, S.; Camenzind, M.; Weisse, B.; Rossi, R. M.; Sorin, F.; Boesel, L. F. Polydimethylsiloxane based soft polymer optical fibers: from the processing-property relationship to pressure sensing applications. Mater. Des. 2023, 232, 112115 (14 pp.). https://doi.org/10.1016/j.matdes.2023.112115

Struzziero, G.; Barbezat, M.; Skordos, A. A. Assessment of the benefits of 3D printing of advanced thermosetting composites using process simulation and numerical optimisation. Addit. Manuf. 2023, 63, 103417 (16 pp.). https://doi.org/10.1016/j.addma.2023.103417

Taddei, F.; Struzziero, G.; Michaud, V. Residual stress mitigation in additively manufactured thick composites. In Proceedings of the 2023 international conference on composite materials (ICCM23), presented at the Proceedings of the 2023 international conference on composite materials (ICCM23), Belfast, July 30-August 4, 2023; 2023.

Vettoretto, G.; Li, Z.; Affolter, C. Evaluation of the ultimate collapse load of a high-voltage transmission tower under excessive wind loads. Buildings 2023, 13 (2), 513 (26 pp.). https://doi.org/10.3390/buildings13020513

Vidrih, T.; Ott, V.; Terrasi, G. P. Mechanical performance of 3D-printed carbon fiber reinforced thermoplastic looped tensile elements. In Single volume proceedings. CICE 2023. 11th international conference on fiber-reinforced polymer (FRP) composites in civil engineering, presented at the CICE 2023. 11th international conference on fiber-reinforced polymer (FRP) composites in civil engineering, Rio de Janeiro, July 23-26, 2023; sine nomine: sine loco, 2023; p (8 pp.). https://doi.org/10.5281/zenodo.8066453

Zote, S. W.; Navale, D. N.; Ranade, P. B.; Kulal, D. K.; Wagh, S. J.; Pansare, A. Synthesis of cholest-5-en-3-ol(3β)-3-[4-(2,2,2-trifluoroacetamido) benzoate] (ChTfAB) a thermotropic liquid crystalline material. Indian J. Chem. 2023, 62 (7), 755-760. https://doi.org/10.56042/ijc.v62i7.3736